Print to the edge, without a white border on labels and business cards (Full Version)

All Forums >> [Product Forums] >> [Productivity Software] >> [The Print Shop 23.1 and older] >> PS Printing Specific Issues



Message


lindarobin -> Print to the edge, without a white border on labels and business cards (6/17/2007 12:49:39 AM)

There is a good reason for the label templates to have a default white border. That is the safety zone that ensures your design and text fit within the label. If the labels on the sheet are flush against each other, printing to the edge will likely result in design overflow from one label onto its neighbours. The top image shows what you want; the bottom image shows what you may get.

[image]local://upfiles/72/3A8D0C3064304709BBA08C3010B1A687.jpg[/image]

It is near impossible to align the printing on your paper within one mm of the label edge every time. This is called printer feed variance. You can minimize the visual impact of printer feed variance by making the four edges the same colour or background.

Printer feed variance is not a concern if you print onto unformatted stock. By doing your own cutting, you can make sure your cuts are exactly on the edges.

If you still want to make full-bleed cards/labels on your pre-formatted stock, you will need to create a custom stock with the Custom Paper Wizard. (Read the Help menu's section on this subject.) One of the Wizard's steps will offer the full-bleed option. Check that box. When you are finished creating your custom paper, start a new project and select your new custom paper from the list.

Be advised. Printer feed variance is a fact. You may get one sheet printed perfectly and the very next sheet is off by a mm. This is within realistic expectations. Vibrations can cause the paper to slip a little to one side or the printer grabs the paper too hard on one side...


How are full bleed business cards printed by the thousands by professional printing companies? They use "gutters" which are the horizontal and vertical gaps between the cards. The card is designed to overflow its edges into the gutters, rather than into the next card. This image shows the requirements your design must meet in order to be professionally mass produced. (Requirements may vary for different companies.)

[image]local://upfiles/72/7A0891BC713747B5A821C091FE18FB59.jpg[/image]




Page: [1]

Valid CSS!




Forum Software © ASPPlayground.NET Advanced Edition 2.4
0.015625