Printer Problem (Full Version)

All Forums >> [Product Forums] >> [Productivity Software] >> The Print Shop 3.0



Message

fioskin -> Printer Problem (8/5/2014 1:08:44 PM)

All of sudden today I have a problem printing a "sign" project -- in that I have in the past always had a screen offer the option of how many sheets high and wide I want to use to print the poster but now I don't get that screen at all. What do I do to restore it??????

Thank you,
Fred

(personal contact info removed to protect against spammers)



ellengard -> RE: Printer Problem (8/5/2014 3:29:07 PM)

Is this the screen you are talking about? (v3.0/3.5) If not, please state what version of Print Shop you are using and what operating system.

[image]local://upfiles/9017/04393E6420194BC9974970467418BE45.jpg[/image]



fioskin -> RE: Printer Problem (8/5/2014 3:55:31 PM)

Yes, this would be the screen I'd like to get -- but I don't seem to have the "Output Size" button appearing in the initial print choice screen in which I select my printer and type of page (letter), etc. How do I get it??

I am running Print Shop 3.0 Professional. I'm using an HP OfficeJet Pro 8600 Plus printer.

Thank You,
Fred Oskin



ellengard -> RE: Printer Problem (8/5/2014 6:06:10 PM)

I'm not sure, but I think this print feature is not available for 3.0 because I see on the Print Shop website that oversize printing is a new feature in 3.5.

Did you do oversize printing with 3.0? Or was it version 23 or older?

If you definitely remember an Output Size button on the 3.0 Print dialog box, then I'll have to refer you to tech support for a fix.

As a workaround, I would save as PDF then open it in Adobe Reader and use its poster printing features. It's similar - you rescale the page onto as many pages as desired.

[image]local://upfiles/9017/F2FB1DBA360147599F0BF7197E8F8C93.jpg[/image]



fioskin -> RE: Printer Problem (8/5/2014 6:13:32 PM)

I have been doing this for all the years I've been using Print Shop v. 3.0 and all of a sudden (It wasn't the button which you depicted in the printscreen sent earlier but it was another screen that opened up when I selected the printer.) it is not available! So, I'd very much appreciate your making it possible for me to get help from Tech Support. I had tried calling today but could not reach them -- so I'll be grateful for your enabling this to be done!

As to v. 3.5 I'd be willing to upgrade to it, just as I've gradually been upgrading my Print Shop product over the many years I've been using it -- Would you please send me information.

However, the project I'm doing now is one that I need to get done this week!

I will try to save it as a pdf in the meantime, as you have suggested -- I've never done that but I'll certainly give it a try.



ellengard -> RE: Printer Problem (8/5/2014 6:18:06 PM)

I found this old thread from two years ago, back when I had version 3.0.
http://forums.encoreusa.com/tm.asp?m=45000
Seems we could not print multi-page signs with 3.0 except with the workaround. If memory serves me right, the 3.0 Save As PDF only goes as high as 150 dpi. I suggest using an alternate PDF writer that will save at higher dpi.



ellengard -> RE: Printer Problem (8/5/2014 6:25:44 PM)

quote:

ORIGINAL: fioskin
I have been doing this for all the years I've been using Print Shop v. 3.0 and all of a sudden (It wasn't the button which you depicted in the printscreen sent earlier but it was another screen that opened up when I selected the printer.) it is not available!

So the option appears after you select your printer? That sounds like it's directly related to your printer. i.e. I am presented with different options depending on which of my printers I choose.

Have you changed your printer?



fioskin -> RE: Printer Problem (8/5/2014 6:25:45 PM)

Ellen,

I just tried to do it in Adobe Reader but after I saved the "sign" as a pdf file, when I opened it in Reader the entire document didn't appear in it and I tried but was unable to make this happen so while I see there is a poster printing feature, I do not know how to use it effectively.

If I send you the document would you be able to help me size it properly to open up in Reader?

Thank You,
Fred Oskin



fioskin -> RE: Printer Problem (8/5/2014 6:29:22 PM)

No I haven't changed my printer and I have already called HP but they said it wasn't a problem with the printer.



ellengard -> RE: Printer Problem (8/5/2014 6:29:33 PM)

quote:

ORIGINAL: fioskin
...I'd very much appreciate your making it possible for me to get help from Tech Support.

http://support.encore.com/technicalsupport/tech_support_frm.aspx?product_id=2826



fioskin -> RE: Printer Problem (8/5/2014 6:30:51 PM)

I do not have another pdf writer.



ellengard -> RE: Printer Problem (8/5/2014 6:32:31 PM)

quote:

ORIGINAL: fioskin
If I send you the document would you be able to help me size it properly to open up in Reader?

OK, I'll send you an email. You can reply with the attachment.



fioskin -> RE: Printer Problem (8/5/2014 6:32:42 PM)

I don't understand. What is this?



fioskin -> RE: Printer Problem (8/5/2014 6:39:58 PM)

I see -- it is a form for Tech Support -- I very much appreciate it -- I've already filled it in and sent it!



ellengard -> RE: Printer Problem (8/5/2014 6:40:33 PM)

quote:

ORIGINAL: fioskin
As to v. 3.5 I'd be willing to upgrade to it, just as I've gradually been upgrading my Print Shop product over the many years I've been using it -- Would you please send me information.

http://www.printshop.com/newsletter-sign-up.aspx
If you sign up here, you'll get promo codes for big discounts. Although.... I keep getting discount offers and I never signed up - I think when I registered my product, that put me on the list.



ellengard -> RE: Printer Problem (8/5/2014 7:01:09 PM)

Check your email - the address you used when you registered on this forum.



Page: [1]

Valid CSS!




Forum Software © ASPPlayground.NET Advanced Edition 2.4
0.015625