Encore Forums Encore Forums

Knowledgebase  Register  Login  My Profile  Inbox  Address Book  My Subscription  My Forums 

Photo Gallery  Member List  Search  Calendars  FAQ  Ticket List  Log Out

Print to the edge without having white border on labels/business cards

 
Logged in as: Guest
  Printable Version
All Forums >> [Product Forums] >> [Productivity Software] >> [PrintMaster 18.1 and older] >> PM Printing Specific Issues >> Print to the edge without having white border on labels/business cards Page: [1]
Login
Message << Older Topic   Newer Topic >>
Print to the edge without having white border on labels... - 6/17/2007 12:38:18 AM   
lindarobin


Posts: 947
Joined: 8/28/2004
Status: offline
There is a good reason for the label templates to have a default white border. That is the safety zone that ensures your design and text fit within the label. If the labels on the sheet are flush against each other, printing to the edge will likely result in design overflow from one label onto its neighbours. The top image shows what you want; the bottom image shows what you may get.




It is near impossible to align the printing on your paper within one mm of the label edge every time. This is called printer feed variance. You can minimize the visual impact of printer feed variance by making the four edges the same colour or background.

Printer feed variance is not a concern if you print onto unformatted stock. By doing your own cutting, you can make sure your cuts are exactly on the edges.

If you still want to make full-bleed cards/labels on your pre-formatted stock, you will need to create a custom stock with the Custom Paper Wizard. (Read the Help menu's section on this subject.) One of the Wizard's steps will offer the full-bleed option. Check that box. When you are finished creating your custom paper, start a new project and select your new custom paper from the list.

Be advised. Printer feed variance is a fact. You may get one sheet printed perfectly and the very next sheet is off by a mm. This is within realistic expectations. Vibrations can cause the paper to slip a little to one side or the printer grabs the paper too hard on one side...

Attachment (1)

< Message edited by Brandy redux -- 11/26/2009 4:07:37 PM >
Post #: 1
RE: Print to the edge without having white border on la... - 6/17/2007 12:41:35 AM   
lindarobin


Posts: 947
Joined: 8/28/2004
Status: offline
How are full bleed business cards printed by the thousands by professional printing companies? They use "gutters" which are the horizontal and vertical gaps between the cards. The card is designed to overflow its edges into the gutters, rather than into the next card. This image shows the requirements your design must meet in order to be professionally mass produced. (Requirements may vary for different companies.)




Attachment (1)

< Message edited by Brandy redux -- 11/26/2009 4:07:47 PM >

(in reply to lindarobin)
Post #: 2
RE: Print to the edge without having white border on la... - 2/16/2012 12:26:44 AM   
lindarobin


Posts: 947
Joined: 8/28/2004
Status: offline



While it is possible to purchase business card stock with bleed gutters, it increases the cost per card. I have a quality paper cutter to cut out my own cards so I can print 12 business cards on regular card stock.

My cost per card is much lower because I get more cards per sheet and each sheet is cheaper than the ones with the perforations.

Of course, if I'm careless with my cutting, a few of my cards are ruined.

Attachment (1)

< Message edited by lindarobin -- 2/16/2012 12:27:11 AM >

(in reply to lindarobin)
Post #: 3
Page:   [1]
All Forums >> [Product Forums] >> [Productivity Software] >> [PrintMaster 18.1 and older] >> PM Printing Specific Issues >> Print to the edge without having white border on labels/business cards Page: [1]
Jump to:





New Messages No New Messages
Hot Topic w/ New Messages Hot Topic w/o New Messages
Locked w/ New Messages Locked w/o New Messages
 Post New Thread
 Reply to Message
 Post New Poll
 Submit Vote
 Delete My Own Post
 Delete My Own Thread
 Rate Posts


Please Note: In order to post a message on the forums, you will need to become an Encore Forum Member. Click on the Register link on the top of this page and follow the instructions to become an Encore Forum Member.

If you are a new member and need help using these forums, please click on the FAQ link at the top of this page.

Forum Software © ASPPlayground.NET Advanced Edition 2.4

0.031