Encore Forums Encore Forums

Knowledgebase  Register  Login  My Profile  Inbox  Address Book  My Subscription  My Forums 

Photo Gallery  Member List  Search  Calendars  FAQ  Ticket List  Log Out

that little chain icon at bottom of text box??

 
Logged in as: Guest
  Printable Version
All Forums >> [Product Forums] >> [Productivity Software] >> [The Print Shop 23.1 and older] >> PS General functionality >> that little chain icon at bottom of text box?? Page: [1]
Login
Message << Older Topic   Newer Topic >>
that little chain icon at bottom of text box?? - 11/9/2007 6:26:36 PM   
TWM

 

Posts: 11
Joined: 9/20/2007
Status: offline
I want to start with a blank page (8.5x11) andbild my own page with 2 or 3 coumns of text.

I'm used to page maker (adobe) where you can type text, then make the text box smaller, then click on the bottom of the text box which will 'pick up' the hidden text and allow you to 'place' the remaining text 'into' another text box -- then ALL the text is AUTOMATICALLY 'linked' together as one continuous block of text. When you make one text box bigger (longer), more of the text appears in that column, and less appears in the other column.

I SUSPECT that's that the chain icon at the bottom of the text box in PS is. -- Yes?

But how do I USE that function.

Again, can PS help me AUTOMATICALLY set up columns of continuous text? --- Or am I going to have to 'fake' all of it and create truly separate text boxes (columns) that only seem to flow one to another (text-wise)???

Any help grealy appreciated!

-- TW
Post #: 1
RE: that little chain icon at bottom of text box?? - 11/9/2007 7:25:24 PM   
Brandy redux


Posts: 2376
Joined: 2/7/2007
Status: offline
Hi TW,

This is what Print Shop Help says about 'Connecting Text to Other Text'.

When typing long passages into a text box, the text may not fit in the text box. The extra text isn’t lost, you just can’t see it. Instead of resizing the text box, you can place the extra text in another empty text box anywhere in your project and have the text flow from one box to the other. This is particularly useful for newsletters, in which you want to continue an article from the front page to an inside page, for example.

1. On the Design Desk, add an empty text box to your project to accommodate the overflow from another text box.

2. Select the text box that has an overflow of text that you want to move to the empty text box.

3. Click the Link button at the bottom of this text box.

When you move the pointer over the text, it becomes a Text Flow pointer with an X over it. This means you cannot place the overflow text in a text box that already contains text.

4. Move the Text Flow pointer over the empty text box.

The pointer loses the X. You can now place the overflow text into this empty text box.

5. Click the empty text box.

The overflow text from the first text box flows into the second text box. Notice that when you select connected text boxes, they display arrow buttons showing you how they connect to other text boxes.

6. Repeat steps 1 through 5 as many times as needed, until all the text appears in your project.

Note: You can also resize any of the text boxes to better accommodate the text.

7. To locate the next or previous text box in a flow, click an arrow button at the bottom or top of a text box.

The next or previous text box in the flow is selected.

_____________________________

For More Help:
Click on the FAQ link at the top of this page
Then, click on the All FAQ's button on the next page

To contact me by email, please send your message to pine_97@yahoo.com

(in reply to TWM)
Post #: 2
RE: that little chain icon at bottom of text box?? - 11/9/2007 7:30:22 PM   
Brandy redux


Posts: 2376
Joined: 2/7/2007
Status: offline
Hi again TW,

You might also want to know what Print Shop Help says about 'Disconnecting Text from Other Text.'

You can disconnect two text boxes that are connected so that the text that displays in the second text box is removed and returned to the previous text box.

1. On the Design Desk, select the text box that you want to disconnect from the previous text box.

The text box displays one or more arrow buttons showing that it is connected to at least one other text box.

2. Click the left arrow button to select the previous text box in the connection.

3. Click this text box’s Link button.

The pointer changes to a Text Flow pointer and the text disappears from the previously connected text box. The connection is now broken.

4. Click anywhere outside of a text box to turn off the Text Flow pointer.

Note: If more than two text boxes were connected, text disappears from all following boxes and returns to the first box. The text remains available to flow into another connected text box.

The two or more following text boxes are empty, but they remain connected to each other.

_____________________________

For More Help:
Click on the FAQ link at the top of this page
Then, click on the All FAQ's button on the next page

To contact me by email, please send your message to pine_97@yahoo.com

(in reply to Brandy redux)
Post #: 3
Page:   [1]
All Forums >> [Product Forums] >> [Productivity Software] >> [The Print Shop 23.1 and older] >> PS General functionality >> that little chain icon at bottom of text box?? Page: [1]
Jump to:





New Messages No New Messages
Hot Topic w/ New Messages Hot Topic w/o New Messages
Locked w/ New Messages Locked w/o New Messages
 Post New Thread
 Reply to Message
 Post New Poll
 Submit Vote
 Delete My Own Post
 Delete My Own Thread
 Rate Posts


Please Note: In order to post a message on the forums, you will need to become an Encore Forum Member. Click on the Register link on the top of this page and follow the instructions to become an Encore Forum Member.

If you are a new member and need help using these forums, please click on the FAQ link at the top of this page.

Forum Software © ASPPlayground.NET Advanced Edition 2.4

0.068