Encore Forums Encore Forums

Knowledgebase  Register  Login  My Profile  Inbox  Address Book  My Subscription  My Forums 

Photo Gallery  Member List  Search  Calendars  FAQ  Ticket List  Log Out

Error: Cyclic Redundancy Check (CRC)

 
Logged in as: Guest
  Printable Version
All Forums >> [Product Forums] >> [Productivity Software] >> [PrintMaster 18.1 and older] >> PM Tech Tips >> Error: Cyclic Redundancy Check (CRC) Page: [1]
Login
Message << Older Topic   Newer Topic >>
Error: Cyclic Redundancy Check (CRC) - 8/14/2010 3:30:10 PM   
Brandy redux


Posts: 2376
Joined: 2/7/2007
Status: offline
The Cyclic Redundancy Check (CRC) error message often means that the medium from which you are running the setup (the CD or DVD) is either dirty or damaged.

One recommended solution for that problem would be to clean the CD/DVD, as described below:

a. Use a mild detergent like dish soap, some warm water, and a clean cloth.

b. ALWAYS clean from the center out in a radial direction. NEVER wipe or rub around the disc in a circular motion.

c. Dry the disc with a lint-free cloth so that you don't add any more dust or scratches to the CD/DVD surface. Again, rub in a radial direction, from the center out.

If cleaning the CD/DVD does not solve the problem, the next best thing to do would be to try to install the program on a different computer. If the CD/DVD will not install on a different computer, that would indicate that the CD/DVD might be defective. In that case, the first best course of action would be to click on the link below

Technical Support & Customer Service: Broderbund, Encore, Hoyle, Bicycle

then follow the directions in that FAQ for contacting Customer Service - to inquire as to whether or not replacement disks are still available.

< Message edited by Brandy redux -- 7/3/2012 10:20:01 PM >


_____________________________

For More Help:
Click on the FAQ link at the top of this page
Then, click on the All FAQ's button on the next page

To contact me by email, please send your message to pine_97@yahoo.com
Post #: 1
Page:   [1]
All Forums >> [Product Forums] >> [Productivity Software] >> [PrintMaster 18.1 and older] >> PM Tech Tips >> Error: Cyclic Redundancy Check (CRC) Page: [1]
Jump to:





New Messages No New Messages
Hot Topic w/ New Messages Hot Topic w/o New Messages
Locked w/ New Messages Locked w/o New Messages
 Post New Thread
 Reply to Message
 Post New Poll
 Submit Vote
 Delete My Own Post
 Delete My Own Thread
 Rate Posts


Please Note: In order to post a message on the forums, you will need to become an Encore Forum Member. Click on the Register link on the top of this page and follow the instructions to become an Encore Forum Member.

If you are a new member and need help using these forums, please click on the FAQ link at the top of this page.

Forum Software © ASPPlayground.NET Advanced Edition 2.4

0.031