ORIGINAL: lconley770 ... will projects created in 17 that go beyond the dotted boundary print correctly?
In 18.1, your projects will print the same as they did with 17. Nothing beyond the dotted boundary prints. The boundary can only be made smaller if your printer has the capability to print closer to the edge. To change the margins, go to the printer settings. For example, my printer can print no closer than .17" from the edge.
I have been reading and reading and everything says change your printer settings and I stumbled on how to do this today. When you select print, choose setup, properties and effects. Right there big as life is a box to choose Minimize Margins! Don't know if all printers have this, but mine does and it works. So give this a try.
Post New Thread
Reply to Message
Post New Poll
Delete My Own Post
Delete My Own Thread
Please Note: In order to post a message on the forums, you will need to become an Encore Forum Member. Click on the Register link on the top of this page and follow the instructions to become an Encore Forum Member.
If you are a new member and need help using these forums, please click on the FAQ link at the top of this page.