Encore Forums Encore Forums

Knowledgebase  Register  Login  My Profile  Inbox  Address Book  My Subscription  My Forums 

Photo Gallery  Member List  Search  Calendars  FAQ  Ticket List  Log Out

Printmaster v6 Printing problem

  		Logged in as: Guest
  Printable Version
All Forums >> [Product Forums] >> [Productivity Software] >> PrintMaster 6.0 (released 2013) >> Printmaster v6 Printing problem Page: [1]
Login
Message << Older Topic   Newer Topic >>
Printmaster v6 Printing problem - 7/5/2014 4:53:18 PM   
nonnox15


Posts: 70
Joined: 6/14/2012
Status: offline 		I have problems sometimes printing with my P. v6. I mainly use it with half fold greeting cards. Sometimes it will not print the pages it is supposed to print. i.e. page 3 and 4 instead of 2 and 3. I have to print the outside first and then the inside. Outside is 1 and 4 with inside being 2 and 3. I noticed a post by lindarobin stating to export to PDF first. Is that true for half fold greeting cards?

I was also looking for some user help on using v6. I went to Amazon.com and saw the reviews and said to myself, "Dummy. you should have looked at the reviews first before getting the v6." But, too late for that. On the reviews there were comments from Encore moderators recommending going to the encore forum site to find help with using v6. Thus far, I haven't been able to find any help.

Specifically I would like to be able to use clip art from my previous Printmaster programs. I haven't been able to find any help on that.

Any suggestions
Post #: 1
RE: Printmaster v6 Printing problem - 7/5/2014 8:26:58 PM   
ellengard


Posts: 3253
Joined: 10/2/2006
Status: offline
quote:

ORIGINAL: nonnox15
... I was also looking for some user help on using v6.

There are two main sources of help in the help menu: a user guide in PDF format and a user guide web site.

quote:

I would like to be able to use clip art from my previous Printmaster programs

Clipart from the old PrintMaster can't be directly accessed by any other program. That clipart would have to be exported as JPG or GIF. Those standard image formats can then be imported into v6.0 or any other program.

< Message edited by ellengard -- 7/5/2014 8:39:34 PM >

(in reply to nonnox15)
Post #: 2
RE: Printmaster v6 Printing problem - 7/5/2014 8:37:04 PM   
ellengard


Posts: 3253
Joined: 10/2/2006
Status: offline
quote:

ORIGINAL: nonnox15
Sometimes it will not print the pages it is supposed to print. i.e. page 3 and 4 instead of 2 and 3. I have to print the outside first and then the inside. Outside is 1 and 4 with inside being 2 and 3.

For all half-fold cards, you ALWAYS print 1 and 4, and then 2 and 3. If you try to print it any other way, your card is out of order when folded.

quote:

I noticed a post by lindarobin stating to export to PDF first. Is that true for half fold greeting cards?

Exporting to PDF lets you see if there will be problems before you print, so it can save you from wasting ink and card stock. The PDF should show you the outsides as one page; the insides as another page.

(in reply to nonnox15)
Post #: 3
RE: Printmaster v6 Printing problem - 7/7/2014 2:42:27 PM   
nonnox15


Posts: 70
Joined: 6/14/2012
Status: offline 		Thank you for your response. But, I think you misunderstood my question.
When I said "user help" I was referring to others who use v6 and may have some tips etc.
Thank you, however, for the information. I will be sure to check it out.

(in reply to ellengard)
Post #: 4
RE: Printmaster v6 Printing problem - 7/7/2014 2:53:56 PM   
nonnox15


Posts: 70
Joined: 6/14/2012
Status: offline 		Thank you for this response as well.
I think I have tried printing 1 and 4 and 2 and 3 but as I remember, it didn't work out.
What I have done is click print 1-4 and then when the print preview comes up, remove the page that I didn't want to print.
However, last week I printed the outside, (1 & 4) fine, but when I selected the inside (2 & 3) it printed 2 & 4 or 3 & 4,(I don't remember which). I was following my usual procedure, but I must have over looked that for some reason. It won't "2-sided" print on my printer. I liked Printmaster 18 where I could select "outside" or "inside".
I'll keep trying.

I had come to the conclusion on the clipart on my own. Just a lot of extra work. But sometimes, you have to do what you have to do.
Thanks again.

Let me say that I have used Broderbund products, (even back when it was Mindscape) for years and have always appreciated the programs I have used. That is why Printmaster v6 was such a disappointment to me. Just my input. Thank you.

(in reply to ellengard)
Post #: 5
Page:   [1]
All Forums >> [Product Forums] >> [Productivity Software] >> PrintMaster 6.0 (released 2013) >> Printmaster v6 Printing problem Page: [1]
Jump to:





New Messages No New Messages
Hot Topic w/ New Messages Hot Topic w/o New Messages
Locked w/ New Messages Locked w/o New Messages
 Post New Thread
 Reply to Message
 Post New Poll
 Submit Vote
 Delete My Own Post
 Delete My Own Thread
 Rate Posts


Please Note: In order to post a message on the forums, you will need to become an Encore Forum Member. Click on the Register link on the top of this page and follow the instructions to become an Encore Forum Member.

If you are a new member and need help using these forums, please click on the FAQ link at the top of this page.

Forum Software © ASPPlayground.NET Advanced Edition 2.4

0.016