I have neither a Mac nor a HP, but I'm sure making a standard folded card with printing on both sides, is the same with any program. If this is your first time, try the simplest method. Choose a greeting card template for 8.5x11 paper stock, from the project gallery. You can customize the template with your own graphics and text. Set your printer for 8.5x11 card stock or paper, (if you are not using heavier stock) and duplex printing. If you don't have duplex printing, just tell your printer that you want to print both sides. Then insert ONE* sheet into the printer. When the first side is printed, flip the paper over and reinsert into your printer so that it can finish printing on the other side.
*so your printer will pause, giving you time to reinsert the paper. Otherwise, the printer will start printing on a second sheet of paper.
Post New Thread
Reply to Message
Post New Poll
Delete My Own Post
Delete My Own Thread
Please Note: In order to post a message on the forums, you will need to become an Encore Forum Member. Click on the Register link on the top of this page and follow the instructions to become an Encore Forum Member.
If you are a new member and need help using these forums, please click on the FAQ link at the top of this page.