I have a brand new 17" Toshiba laptop with a powerful NVIDIA graphics processor. My resolution is 1920 x 1080. My graphic driver is up to date.
When I start PS 3.0, it opens and about an inch of the bottom of the PS 3.0 window drops below my laptop screen. PS 3.0 won't let me resize the window vertically to fit on my screen. It will let me resize horizontally, but that's not a problem.
Please help. Thx, ClanCore
< Message edited by lindarobin -- 2/16/2013 7:03:08 PM >
Thank you for your suggestions. I tried setting res to 1366x768.
If I lower the resolution, everything gets bigger, including PS 3.0, and the problem is exacerbated. When I set it to 1366x768 and PS 3.0 drops 1/2 the window below my laptop's screen. And PS 3.0 won't let me resize its window.
Thank you TMLFAN4LIFE for the heads-up that other programs might have the same problem. I will purchase software carefully.
< Message edited by lindarobin -- 2/16/2013 7:01:12 PM >
ORIGINAL: ClanCore ... When I set it to 1366x768 and PS 3.0 drops 1/2 the window below my laptop's screen.
Darn. I was really hoping there would be a solution for this. Anyway, earlier when you said that the bottom inch couldn't be seen, I checked to see how badly that would compromise your ability to use the program.
Well, you're not missing much, fortunately. There's the Launch Smilebox link which takes you to smilebox.com. There's also the Template Store link which takes you to printshoppacks.com.
More importantly, there's the thumbnail images of your project pages that make it simple to move from page to page, and to add a new page. These functions can be accessed through the Project and View tabs at the top, so you're not prevented from doing these things. For single page projects, the thumbnails strip is redundant.
Post New Thread
Reply to Message
Post New Poll
Delete My Own Post
Delete My Own Thread
Please Note: In order to post a message on the forums, you will need to become an Encore Forum Member. Click on the Register link on the top of this page and follow the instructions to become an Encore Forum Member.
If you are a new member and need help using these forums, please click on the FAQ link at the top of this page.